1/10 R/C FIGHTER NXGEN (DT-04 CHASSIS)

Length: 395 mm. Image shows painted and assembled kit.

The DT series of chassis and its Fighter Buggy models enjoy great popularity around the world, and have evolved through iterations such as the Fighter Buggy RX on the DT-01 chassis, the Super Fighter G on the DT-02, the Neo Fighter Buggy on the DT-03, and now the Fighter NXGEN on the new DT-04 chassis. Its body is inspired by full size single-seater buggies, and has separate body panels screw-fixed to its frame. A driver figure is also included.

DT-04 Chassis: Lively RWD Performance
This is a rear-wheel drive buggy chassis which offers ease of assembly and lively performance. It has an inline battery pack position, and a rear-mounted motor to give the rear wheels plenty of traction. The sealed gearbox has a built-in gear differential for smooth cornering and helps keep out dust and dirt. Two wheelbases can be selected: 265mm for emphasis on handling or 280mm for emphasis on stability. 4-wheel independent double wishbone suspension with long arms employs CVA oil dampers. Front skid angle is 22.5 degrees to ensure both controllability and powerful performance. The 3-piece steering tie-rod gives true steering. Here, the chassis features ribbed tires on the front, and grippy square spike tires on the rear.

Specifications
●Length: 395mm (with 265mm wheelbase), width: 245mm, height: 125mm ●Wheelbase: 265mm/280mm ●Tread (front/rear): 217mm/204mm ●Tire width/diameter: 27/80mm (front), 41/86mm (rear) ●Monocoque frame ●Rear-wheel drive ●3-bevel differential ●3-piece steering tie-rod ●Front & rear double wishbone suspension with CVA oil dampers ●Gear Ratio = 9.28:1 ●Type 540 Motor ●ESC included for export.

Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

The Fighter NXGEN form is inspired by full size single-seater buggies.
Long arms in the front double wishbone suspension help the Fighter NXGEN take on undulations. Turnbuckle shafts in the steering linkage allow easy fine-tuning.
CVA oil dampers help absorb big shocks, translating into a great drive.
Dish design wheels are paired with ribbed front tires.

The motor is situated at the rear, helping with rear traction. The back of the buggy also uses double wishbone suspension with CVA oil dampers.
Rear star dish wheels are paired with grippy square spike tires.
Reassemble the front section (arms, etc.) to switch between two different wheelbases (long and short).
The skid angle on the front bumper helps the model take on off-road surfaces.

The body is made up of seven molded plastic panels, for the roof, sides and more, screw-attached to the frame.
This driver is ready to accompany you on your R/C adventures!
The battery is positioned centrally in the plastic bathtub frame.
Access the battery pack by lifting up the roll cage and removing the driver figure.