Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

Electric R/C Car Series no.707
XV-02 PRO Chassis Kit
Item No: 58707

This shaft-driven 4WD chassis kit features a front midship motor and transmits power from the spur gear in the center via identical length front and rear long propeller shafts, which allows running on surfaces from on-road to flat dirt. 39T differential gears front and rear, and one setup option 40T differential gear are included, facilitating changes to drive balance. It features optimum balance and a slim chassis, plus 4-wheel independent double wishbone suspension with aluminum-cylinder long oil dampers.

A responsive, robust steering setup features aluminum servo stay, hi-torque servo saver, and turnbuckle steering rod for quick fine-tuning.

This image goes close-up on the front double-wishbone suspension, which features caster blocks with an angle of six degrees.

Long dampers with aluminum cylinders expertly cushion the chassis. Upper turnbuckle arms and universal drive shafts come as standard.

Power from the front-midship motor goes to the front and rear of the chassis via a pair of indentical length propeller shafts.

Front and rear sealed gearboxes each contain a gear differential for superior performance; change their oil to fine-tune setup.

The double wishbone rear suspension is pictured here. With use of separately sold Item 53539, upper arm position can be adjusted.

The rear of the model is also fitted with high performance long dampers that employ precision aluminum cylinders and blue caps.

The longitudinally-positioned battery is on its side, contributing to the narrow chassis. It is secured via lever design battery holders.

This profile view of the XV-02 PRO shows just how low-profile the chassis is, while stil maintaining considerable ground clearance.

White dish wheels are paired with rally block tires that give a controllable drive on-road and on flat dirt.

The flat chassis bottom and skid angle on the front bumper further contribute to flat dirt performance.

Attached with sponge tape, the included polycarbonate chassis cover helps keep stones out of the chassis.

Featured Components
Drivetrain: Full ball bearings Aluminum propeller shafts (front/rear) Oil-filled gear differentials (front/rear, two 39T and one 40T included) Universal drive shafts (front/rear)
Suspension: Aluminum long dampers (front/rear, with blue caps) 6-degree caster blocks Turnbuckle shaft upper arms
Chassis: Front bumper with skid angle Polycarbonate chassis cover Aluminum servo mount Hi-torque servo saver

Length: 368mm, width: 180mm Wheelbase: 257mm Bathtub frame Front-midship motor, shaft-driven 4WD Oil-filled gear differentials 3-piece steering tie-rod 4-wheel independent double wishbone suspension Long oil dampers with aluminum cylinders Gear ratio (with kit-standard 19T pinion) = 9.58:1 (14 ratios between 10.71:1 and 6.28:1 possible with separately sold pinions) Electronic speed controller (ESC) is sold separately.

Separately Required Items
Body Type 540 motor 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

Information is current as of March 30, 2022. Specifications are subject to change without notice.