Global Top
Item No:35310
1/35 Military Miniature Series No.310
1/35 STURMGESCHUTZ III Ausf.G “FINNISH ARMY”
![](<img src="//d7z22c0gz59ng.cloudfront.net/japan_contents/img/usr/item/3/35310/35310_1.jpg" />
)
Length: 189mm. Image shows finished model.
One Tough Finnish Tank
During the Soviet-Finland War during WWII, the Finnish Army were provided with Sturmgeschütz III Ausf.G tanks from Germany which later became their main tank until the end of the war. Equipped to the low profile hull of the Ausf.G was a powerful, long-barreled 7.5cm anti-tank gun. Once they had arrived in Finland, their Schürzen armor was removed, tool boxes were placed on the rear deck, and modifications were made in order to install Russian DT machine guns. In the spring of 1944, the Ausf.G fought against Russian armored forces and protected Finland from invasion. Afterwards, to improve defensive capabilities of the Ausf.G, concrete blocks and logs were attached to the tank's hull. Even after WWII, the Ausf.G continued to serve the Finnish army with distinction up until the 1960s.
During the Soviet-Finland War during WWII, the Finnish Army were provided with Sturmgeschütz III Ausf.G tanks from Germany which later became their main tank until the end of the war. Equipped to the low profile hull of the Ausf.G was a powerful, long-barreled 7.5cm anti-tank gun. Once they had arrived in Finland, their Schürzen armor was removed, tool boxes were placed on the rear deck, and modifications were made in order to install Russian DT machine guns. In the spring of 1944, the Ausf.G fought against Russian armored forces and protected Finland from invasion. Afterwards, to improve defensive capabilities of the Ausf.G, concrete blocks and logs were attached to the tank's hull. Even after WWII, the Ausf.G continued to serve the Finnish army with distinction up until the 1960s.
![](<img src="//d7z22c0gz59ng.cloudfront.net/japan_contents/img/usr/item/pkg/35310_p1.jpg" />
)
About the Model
This is a 1/35 scale plastic assembly model kit. ★Length: 189mm, Width: 85mm. Model faithfully reproduces the proud form of the Ausf.G used by the Finnish army. ★A wide variety of accessory parts are included to allow you to realistically depict either an early or late type Finnish army Sturmgeschütz III Ausf.G. ★The DT machine gun has a sharp finish. ★Commander torso figure and four kinds of markings included.
This is a 1/35 scale plastic assembly model kit. ★Length: 189mm, Width: 85mm. Model faithfully reproduces the proud form of the Ausf.G used by the Finnish army. ★A wide variety of accessory parts are included to allow you to realistically depict either an early or late type Finnish army Sturmgeschütz III Ausf.G. ★The DT machine gun has a sharp finish. ★Commander torso figure and four kinds of markings included.
-
Parts for concrete blocks and logs are included to depict late type vehicle.
-
Parts for Russian DT machine gun and rear placed tool boxes are included to depict early type vehicle.
![](<img src="//d7z22c0gz59ng.cloudfront.net/japan_contents/img/usr/item/3/35310/35310_4c1.jpg" />
)
![](<img src="//d7z22c0gz59ng.cloudfront.net/japan_contents/img/usr/item/3/35310/35310_4c2.jpg" />
)
![](<img src="//d7z22c0gz59ng.cloudfront.net/japan_contents/img/usr/item/cut/35310_ct1.jpg" />
)
Tamiya Colors required
Tamiya Colors for brush and airbrush painting
-
Tools & PaintsTAMIYA COLOR XF-20 MEDIUM GREY
Item No.
ITEM No.0XF20 -
Tools & PaintsTAMIYA COLOR XF-64 RED BROWN
Item No.
ITEM No.0XF64 -
Tools & PaintsTAMIYA COLOR XF-67 NATO GREEN
Item No.
ITEM No.0XF67
See more
Information is current as of November 10, 2010. Specifications are subject to change without notice.
-
Tamiya plastic models can be a hobby for a lifetime, and you can get so much more out of the hobby with the tools, paints and finishing materials introduced in this guide.
-
Cars, motorcycles, aircraft, military vehicles, even dinosaurs! You are sure to find a genre to pique your interest in the Tamiya line-up, so come and take a look at the main page for static models on this site.
