Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models

Robocraft Series No.14 (ITEM 71114)



Overall length: 153mm

(Image shows fully assembled model)

Swinging Tail Fin For Smooth Swimming

The latest release in the Robocraft Series is our first water based Robocraft, the Mechanical Blowfish. Using a crank and linkage rod system this robo-fish propels itself through the water by its swinging tail fin. White under-belly holds the motor, gearbox, battery box and switch and is sealed water-proof tight. Parts are easily put together by snap-lock pieces or screws, and transparent green back means you can see all the mechanics even after completion.

Click to enlarge Tail Movement

Gearbox transfers motor rotation to swinging tail movement via crank and link rod. The gearbox plays the vital role of reducing motor speed, allowing for splash free movement. Takes about 7 seconds to swim 1 meter.
Click to enlarge
Click to enlarge Water-Proofing

Uses water proof taping and rubber O-rings to stop water coming in through screw holes, power switch, tail fin and joining line between top and bottom halves.
Click to enlarge
Click to enlarge Swimming Control

Pull the stopper located at the base of the tail and turn left or right to control the swimming direction. The more you turn the stopper the greater the change in swimming angle. The tail is also made from an easy to cut material, allowing you to freely shape the tail for best swimming performance.
Click to enlarge

Basic Specifications
Overall length: 197mm Overall height: 81mm Body material: ABS resin Gearbox and motor included Tape and rubber o-rings used to water proof body Screw driver included Requires one R6/AA/UM3 battery (sold separately) Continuous running time with alkaline battery: 4hrs
How to Play
To be used in still water with no waves. Simply place in water and watch it swim!


Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models