Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

TRF Series No.289

TRF102 Chassis Kit
Item No: 42289
Item image
Length: 337mm. Image shows assembled kit.
*Body, wings, motor, tires, wheels, R/C equipment, battery pack and charger are sold separately.

Get Ready for a Revolutionary Formula R/C Experience!
This hi-spec 2WD R/C formula chassis assembly kit employs a rear T-bar suspension setup with roll point ball and pitch shaft for completely independent roll and pitch control, and superior road holding. The front of the car utilizes independent kingpin coil-sprung suspension, while the screw-attached servo is secured with an aluminum mount and carbon fiber bridge. Slits on either side of the new 2.5mm-thick carbon fiber lower deck enhance its flexibility, which is maximized by the float mounting of the battery on the 2.0mm-thick upper deck. This leads to greater suspension stroke for smooth and stable handling. The motor mount allows adjustment of rear wing height.

Image ★Revolutionized T-Bar rear setup features completely independent pitch and roll movement. Roll point ball is positioned low to maximize performance.
Image ★The battery pack is given a floating mount on the upper deck, removing rigidity from the lower deck and allowing full exploitation of its flexibility.
Image ★The steering servo is held securely in place using an aluminum suspension mount and carbon fiber bridge designed specifically for the TRF102.
スペース
Featured Components
●*Carbon Lower Deck (2.5mm thick) ●*Carbon Upper Deck (2mm thick) ●*Upper Brace (2.5mm thick) ●*Carbon Lower Brace (2.5mm thick) ●*Carbon Rear Bulkhead (2.0mm) ●*Aluminum Servo Mount ●*Aluminum Motor Mount ●*T-Bar ●TRF Damper ●F104 Low-Friction Suspension Ball Set (Item 54161) ●F104 Adjustable Metal Upright Set (Item 54357) ●Hi-Torque Servo Saver (Black) ●Integrated Carbon Diff Plate & Rear Shaft ●Reinforced Front Suspension Arms

*denotes parts designed specifically for the TRF102 chassis.
スペース
Specifications
●Chassis Length: 337mm ●Wheelbase: 270mm ●Carbon Double-Deck Frame ●Rear Direct Drive 2WD ●Ball Differential ●Symmetrical Steering Tie Rods ●Suspension: Kingpin Coil Spring (L/R independent) (Front), T-Bar (utilizing roll point ball and pitch shaft) (Rear) ●TRF Damper & High-Efficiency Roll Damper ●Gear Ratio = 4.00:1 (when used with kit-included 96T Spur and 24T Pinion) ●Requires Motor and Electronic Speed Controller (Sold Separately)

Separately Required Items
●Body ●Front/Rear Wings ●Motor ●Tires ●Wheels ●2-channel R/C system with ESC ●Batteries for transmitter ●Battery Pack and Charger

Information is correct as of June 11, 2015. Specifications are subject to change without notice.

スペース

Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD