|DMD stands for "DIGITAL TWIN MOTOR DIFFERENTIAL" and this T-03 unit features a digital receiver and enables 4-channel control of R/C tank operations such as speed-proportional forward/reverse/turning movement, turret rotation, and gun elevation.|
・DMD Control Unit T-03 Connections
(Receiver / Motors)
・How to Operate
(Operation Instructions / LED Indicator / Steering Trim)
・DMD Control Unit T-03 Usage Cautions
(Cautions / Compatible Transmitters)
|【 What Can the DMD Control Unit Do? 】|
・4-channel operation enables realistic tank driving action with turret rotation and gun elevation.|
・The DMD Control Unit T-03 included with Tamiya's 1/16 R/C Tiger I Early Production (Item 56009) takes signals from the transmitter to control four different motors. In particular, the drive motors can be controlled independently to enable the left and right tracks to reproduce realistic tank movement. Digital proporsional system means the speed of the tank's movement can be precisely controlled. The elevation of the main gun as well as the rotation of the turret can also be operated freely.
※If the current for the turret rotation/gun elevation output exceeds 4.0A, the overload protection will activate and stop the control unit. Switch off, then switch on again to return to normal operation.
|【 Specifications 】|
|1||Power Source||7.2V Ni-Cd Battery Pack||Minimum Voltage 5.5V|
|2||Current||Less Than 100mA (at 7.2V)||Except for Motor, BEC Output|
|3||Receiver||4-Channel Signal||Connector modification may be required when using other manufacturers' receivers.|
Click here for details.
|4||Initial Setting Switch||Set direction and pulse width of control stick.||When using transmitters other than ATTACK 4WD.|
|5||Neutral Trim||Corrects imbalances caused by assembly.||Use trim on transmitter to adjust during driving.|
|6||Connector for Left Motor||256 Resolution / PWM 2kHz||Maximum Continuous: 20A (1 min.), Instantaneous: 75A (1 sec.)|
|7||Connectot for Right Motor||256 Resolution / PWM 2kHz||Maximum Continuous: 20A (1 min.), Instantaneous: 75A (1 sec.)|
|8||Turret Rotation Output||PWM||Maximum Continuous: 30A (2 min.), Instantaneous: 4.0A (1 sec.)|
|9||Gun Elevation Output||Normal, Reverse, Stop||Maximum Continuous: 30A (2 min.), Instantaneous: 4.0A (1 sec.)|
|10||Operation Status Display||2-color LED||Click here for details.|
|11||Overload Protection||Overdischarge / Overheat detection||Overdischarge: Switch off to recover|
Overheat: Self-recovery after temperature reduces
|13||Overheat Protection Temperature||-20℃〜+60℃|
|14||Case Dimensions||108.2×47.2×10.5 (mm)||Height including output connector: 20.5mm|
|【 How to Purchase 】|
|DMD Control Unit T-03|
※Instruction manual not included.
Tamiya ATTACK 4WD TR Set
Ideal for controlling DMD Control Unit T-03.
2 Pin Micro Connector
Use to connect turret rotation and gun elevation components.
Tamiya Geared Motors
Integrated gear and motor units for robotic creations.
「Geared Motor 380K75」 ITEM 89861
「Geared Motor 540K75」 ITEM 89872
「Geared Motor 3633K36」 ITEM 89841
■Please contact Tamiya's Customer Service Department (Japan only) to order.
Please state the Item Number, Item Name, and purchase quantity when ordering.