Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

T3-01 Chassis

T3-01 Chassis: Designed for Fun
The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle.




The trademark cornering lean is achieved by the servo acting on the rear section, in turn tilting the front.


Internal spring in the front fork gives stability even at low speeds. A housing allows attachment of LEDs.


A close-up on the telescopic front fork suspension, which gives a realistic ride.



Cams on the rotating pitch axis slide left and right, cushioning the rear via the built-in coil spring.


Model is compatible not only with R6/AA/UM3 batteries, but also Tamiya LF Battery LF1100-6.6V Racing Pack.


Support arms move in concert with the steering servo, and aid the model in righting itself.



Support arms move in concert with the steering servo, and aid the model in righting itself.




Specifications are subject to change.


Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD