Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

Electric R/C Car Series no.678
1/10 R/C Comical Avante (GF-01CB)
Item No: 58678

Length: 345mm. Image shows painted and assembled kit.

Comical Avante!
This R/C model assembly kit creates a 4WD buggy, with a lightweight and durable stylized polycarbonate version of the legendary Avante body. Paint it up in iconic Avante metallic blue, apply the familiar stickers, and voila! A new, Comical Avante! A T-shirted figure is included in the kit for installation at the wheel, as are left and right flags, plus depictions of stylish megaphone muffler ends. The GF-01CB chassis is a gear-driven unit that provides a thrilling drive and super wheelies when you jam on the throttle.

The charm of the legendary Avante is encapsulated in this bold new body design, sure to thrill R/C veterans and newcomers alike!

This image shows the model viewed from the rear, with the chequered flags left and right giving the model a nice accent.

An figure is included in the kit for assembly. Choose from a multitude of stickers to get the figure looking just how you want.

Left: Give your model a totally new look by installing separately sold LEDs! This image shows round polycarbonate cases.

Right: Squared off polycarbonate cases are also included, as shown here. Use whatever combination you feel suits your car!

Left: The rear end is home to a pair of stylish parts depicting "megaphone" mufflers to give your car that bit of extra edge!

Right: Why not take a look at the Comical Avante in action? We have a video on the official Tamiya YouTube page awaiting your viewing pleasure...

GF-01: Seriously Stable 4WD
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and WR-02 or GF-01 Hop-Up Option parts are available to hop-up your model.

Left: The GF-01CB chassis has a wide stance for superior balance, even during wheelies. It's compatible with WR-02 and GF-01 Hop-Up Options.

Right: This cross section of the monocoque gives a close-up on the gear-driven powertrain, which supplies reliable and smooth four-wheel drive.

Left: Four-wheel double wishbone suspension employs CVA oil dampers to ensure that your model can take plenty of bumps in its stride.

Right: Yellow rims and dark gray spokes are a winning combination. New ST block bubble tires will give a drive to remember!

Length: 345mm Width: 240mm Height:174mm Tread: 188mm (Front), 184mm (Rear) Tire Width/Diameter: 46mm/99mm (Front), 56/99mm (Rear) Gear-Driven 4WD Monocoque Frame 3-Bevel Differentials 2-Piece Steering Tie-Rod Front & Rear Double Wishbone Suspension CVA Oil Dampers Gear Ratio = 18.03:1 Type 540 Motor Requires Electronic Speed Controller (separately sold)

Separately Required Items
2-Channel R/C Unit with ESC@Battery Pack & Charger R6/AA/UM3 batteries for transmitter

Information is current as of April 30, 2020. Specifications are subject to change without notice.