Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

Special Edition R/C Product
1/10 R/C Top-Force Evo. (2021)
Item No: 47470


Length: 400mm. Image shows assembled kit.

Impressive Indeed!
This R/C model assembly kit is a re-released and updated version of Top-Force EVO., a buggy first released in 1992. Its honed body and rear wing are molded in polycarbonate pre-painted in gun metal color, the shaft-driven 4WD drivetrain employs three differentials amd universal drive shafts, and the chassis is based around a rigid and lightweight carbon fiber double-deck frame with damper stays and battery plates crafted in the same material. The model is compatible not only with 7.2V Racing Pack products, but also the LF2200-6.6V Racing Pack.

Race-Oriented Shaft-Driven 4WD Chassis
This chassis features a race-oriented design with a lightweight carbon fiber double-deck layout that supports the gearboxes with 2mm thickness carbon fiber plates. A drivetrain with ball differentials front and rear and center one-way contributes towards sharp steering response, while front and rear assembly type universal shafts offer superior efficiency. Four-wheel independent double wishbone suspension employs oil dampers with aluminum cylinders, while turnbuckle upper arms allow camber adjustment. Vibrant orange wheels are paired with grippy spike tires.


This model features a highly refined polycarbonate body design that oozes speed; stickers are included in the kit to decorate it.


A 4WD setup employs a steel propeller shaft to the right of the upper deck. Drivetrain and steering linkage feature efficient ball bearings.


This image gives a close-up on the front double wishbone suspension, which also features turnbuckle shaft upper arms for easy adjustment.


Upper and lower decks, plus front and rear damper stays, and battery plates are crafted in lightweight, rigid carbon fiber material.


This image of the double-wishbone rear suspension shows off the dampers with aluminum cylinders. Universal drive shafts are employed front and rear.


Gear covers can be removed simply with the loosening of four screws, allowing easy access to the differentials for swift maintenance.


Alluring, vibrant orange color dish design wheels are paired with spike tires that ensure the Top-Force Evo. has plenty of grip.


There is exemplary protection from dust, dirt and other potential infiltrators thanks to the kit's tough polycarbonate undercowl.


An epic polycarbonate wing on the rear of the buggy features integrated end plates and a slatted design that really looks the part.

Specifications
Length: 400mm, width: 250mm, height: 190mm Wheelbase: 270mm Tread: 217mm (front), 205mm (rear) Carbon fiber double deck frame Shaft-driven 4WD Front & rear ball differentials Center one-way 3-Piece steering tie-rod (with ball bearings) 4-Wheel independent double-wishbone suspension Tire Width/Diameter: 32/82mm (front), 41/82mm (rear) Aluminum cylinder oil dampers Gear Ratio = 8.59:1 Type 540 motor Full ball bearings Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

Information is current as of May 28, 2021. Specifications are subject to change without notice.