Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

Special Edition R/C Product
1/10 R/C Terra Scorcher (2020)
Item No: 47442


Length: 390mm. Image shows painted and assembled kit.

Scorch the Earth
This is an updated re-release version of the Terra Scorcher, the original of which was first released in 1988. The chassis consists of a lightweight and tough bathtub frame plus 4-wheel double wishbone with CVA oil dampers for a superior ride, and threaded shaft upper arms to allow easy camber adjustment. Stabilizers come as standard front and rear, and you can use adjusters in the three-piece tie-rod setup to alter toe. Body and wing are molded in clear polycarbonate, with stickers included to apply the logos, and grippy spike tires round off the look.

Sturdy, Efficient Shaft-Driven 4WD
The Terra Scorcher chassis is a tuned version of that seen on Tamiya's Thunder Shot. It is based around a lightweight yet highly rigid bathtub frame, with differential gears front and rear and an extremely solid setup. 4-wheel double wishbone suspension is fitted with CVA oil dampers front and rear, and stabilizers further tune the ride, while threaded shaft upper arms allow swift alteration of your car's camber. Full ball bearings in the drive train ensure superb efficiency, enhanced by a dedicated aluminum motor mount for this re-issue. Universal shafts eliminate any worries about shafts coming out in big impacts.

Left: Take a wider look at the bathtub frame chassis, lightweight and sturdy to protect the R/C equipment housed within.

Right: The model features an aluminum motor mount for precision installation, superior efficiency, and even heat sink effect.

Left: Four high performance CVA oil dampers are included, working in tandem with the 4-wheel double wishbone suspension setup.

Right: Further efficiency is provided by universal shafts, with superior durability for peace of mind in the event of a crash.

Specifications
Length: 390mm, Width: 240mm, Height: 130mm Wheelbase: 260mm@Tread: 203mm (Front), 194mm (Rear) Tire Width/Diameter: 38/83mm (Front & Rear) Bathtub Frame Shaft-Driven 4WD 3-Bevel Differential Gears 4-Wheel Independent Double Wishbone Suspension CVA Oil Dampers Front & Rear Stabilizers Gear Ratio = 7.68:1 Type 540 Motor Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

Information is current as of May 25, 2020. Specifications are subject to change without notice.