Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

Special Edition R/C Product
1/10 R/C Ford SVT Mustang Cobra R 1995 (TT-01 Type-E)
Item No: 47430

Length: 456mm. Image shows painted and assembled kit.

Ready to Strike
Ford's Mustang is a true motoring legend that has been building since the release of the first car back in 1964. This assembly kit model depicts a 1995 race variant called the SVT Mustang Cobra R, which boasted a 300hp 5.8-liter V8 and bulging FRP bonnet. A mere 250 were ever built. The powerful, sleek form of the car is accurately captured by this model's polycarbonate body, with separate molded parts for side mirrors and the rear wing. Stickers are included to add the all important decorative touch.

Left: 5-spoke wheels have a silver color plated finish, and are paired with treaded semi-pneumatic tires.

Right: Separately molded plastic parts are used for the side mirrors, with stickers for the mirror surfaces.

Left: The rear wing is attached via screws and adds another racy accent to the rear of the car.

Right: Triple rear lights are depicted using paint and stickers. MUSTANG is imprinted in the bumper.

Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Silver color plated wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!

Left: Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive.

Right: A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion.

Left: This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car.

Right: Damper stay and gear cover are separate parts; the stay features two different damper attachment holes to choose from.

Length: 456mm, Width: 184mm, Height: 129mm Wheelbase: 257mm Tire Width/Diameter: 27/67mm Bathtub Type Chassis Frame Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD F/R 3-Bevel Differentials 3-Piece Steering Tie-Rod 4-Wheel Double Wishbone Suspension F/R Friction Dampers Gear Ratio=8.35:1Type 540 Motor Requires an Electronic Speed Controller (sold separately)

Separately Required Items
2-Channel R/C System w/ESC R6/AA/UM3 batteries for transmitter Battery Pack & Charger

Information is current as of March 10, 2020. Specifications are subject to change without notice.