Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD

MA Chassis

The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

Specifications
★Length: 156m, width: 97mm ★Wheelbase: 80mm ★Tread: 59.5mm ★Weight: 125.9g ★Ground clearance: 2.2mm
*Please note that the above specifications may change with the use of different tires, rollers, etc.





★Simply push and slide the 1-piece gear cover to gain access to the motor and gears. This will save you vital seconds of preparation time on racing weekends!

★The MA Chassis is 4mm longer and 5mm wider than its MS counterpart, and this long, wide form gives it an advantage in terms of stability, leading to a superior top speed.

★Side stays on either side of the MA chassis allow the attachment of a variety of grade-up parts such as mass dampers, stabilizer balls and more!


★The MA chassis features a smooth underside with dual beams that stretch the length of the machine, raising the toughness. It also employs a diffuser-shaped rear and motor cooling ducts.

★Battery terminals and motor are secured using separate parts, allowing the machine to avoid the stronger circuit impacts brought by high speeds.

★Features a skid bar under the rear roller stay as standard. The low-friction skid bar has a braking effect on the car in sloped sections of courses, allowing it to run with greater stability.

Specifications are subject to change.


Home | On-Line Catalog | R/C Models | Scale Models | Mini 4WD