 Prev |
Page 9 of 12 | Next  |
) |
Xanavi Nismo Z Tamiya introduces Team Nismo's Xanavi Nismo Z to the 1/10 scale R/C lineup. This new kit replicates the Xanavi Nismo Z as competing in this year's JGTC. The R/C model of the Xanavi Nismo Z features perfectly rendered Xanavi Nismo Z polycarbonate body on the lightweight easy to assemble TT-01 chassis. The TT-01 chassis is a 4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox. |
 1/10 R/C Car Series No.330 (ITEM 58330) Overall length: 440mm, Overall width: 189mm, Overall height: 118mm Powered by a Type 540 motor. Kit includes black wheels, racing slick tires and TEU-101BK ESC Loads of grade-up parts available (sold separately) allowing the TT-01 to match your R/C experience and knowledge.
|
) |
TG10-Mk.2 Chassis Kit Since the TG10-Mk.1 was released the engine car market has greatly expanded, with a growing number of new comers entering the engine R/C car scene. To answer growing demand for a more advanced nitro chassis that can provide new challenges, Tamiya now releases the TG10-Mk.2, which has been developed based on looking at the performance of the TG10-Mk.1 and TG10R, and customer feedback. Layout has been greatly modified with engine placed on the right side of chassis for improved air intake and exhaust efficiency, fuel tank and other heavy parts placed in the center, and overall center of gravity lowered for improved cornering. |
1/10 R/C Glow-Engine Car Series No.42(ITEM 44042)Shaft driven 4WD 200mm wide chassis Fitted with a two-speed transmission, racing clutch, aluminum TRF dampers, ball connector suspension for easy suspension settings, 4 bevel pinion gears and rear stabilizer. Kit does not include body, engine, muffler or manifold. A starter box must be purchased separately to start engine.
|
) |
Engine Starter BoxTW The TW starter box enables quick engine start-up for glow-engine cars by just placing your engine car on the box and pushing down. A rubber wheel, which rotates the fly wheel of your car, generates enough power to start your engine thanks to two high-torque motors. The starter box also features engine start-up delay, allowing you to adjust the amount of time it takes for you engine to start. With adjustable brackets and a total of three rubber wheel positions to choose from, this starter box allows you to start a wide range of engine R/C cars. |
Glow-Engine Parts & Accessories No.68(ITEM 41068)Perfectly adapted to the TG10-Mk.2 chassis. Generates enough power to start your engine thanks to two high-torque motors. Requires two 7.2V batteries (sold separately).
|
) |
XB Overlander Introducing a modern design pick-up truck to the XB series. This stylish blue truck not only looks impressive, but can also take on off-road terrain thanks to massive spike tires and perfectly balanced chassis design. Ready to run straight out of the box, this XB pickup truck is the perfect way to be introduced to the exciting world of off-road R/C. Kit includes all necessary R/C equipment including a TEU-101BK electronic speed controller and Expec SP TTU-03 transmitter. |
1/10 XB R/C Car Series No.29(ITEM 57729)Overall length: 431mm, Overall width: 310mm, Overall height: 214mm Pre-assembled 2WD chassis powered by a Type 540 motor. Body is fully painted and all stickers pre-applied. 4-wheel double wishbone suspension with 4 friction dampers Features easy to use push-button setup TEU-101BK Electronic Speed Controller and Expec SP TTU-03 transmitter.
|
 |
TLT-1 Max Climber Following the release of the 1/18 scale TLT-1 Rock Buster comes the second model in the Little Gear Series, the TLT-1 Max Climber. The Rock Buster proved a huge hit thanks to its powerful climbing, maneuverability, durability and small size. The new Max Climber is packed with all the great features that made the Rock Buster so popular plus a whole new body. Chassis has also been adapted to be compatible with a regular lay down battery pack. |
1/18 Little Gear Series No.2(ITEM 47202)Overall length: 280mm, Overall width: 251mm 98mm diameter wheels All new SUV inspired body featuring cool sleek design. Compatible with a regular lay down battery. Belt drive lightweight aluminum chassis. Type 540 motor included. 4 link push rod suspension with aluminum dampers. 4-wheel steering capabilities (2 servos required).
|
| Prev |
Page 9 of 12 | Next |
Back | Home