 Prev |
Page 11 of 12 | Next  |
) |
DRX-2 Fire-Atlas Finished Model Tamiya releases a finished model of the DRX-2 Fire-Atlas, the first Evo chassis released as a finished model. The finished model Dangun series is perfect for a younger market and non-experienced Dangun users, enabling them to gain basic knowledge and experience. This fully assembled model of Fire-Atlas, the second release on the new 3-piece Evo chassis, comes completely pre-painted with all stickers pre-applied. |
 1/32 Dangun Racer Evo Finished Model Series (ITEM 94525) Overall length: 176mm Pre-painted with stickers pre-applied. Equipped with paddle fighting tires and Type 130 motor. Full instructions and grade-up parts guide included. Model clearly viewable thanks to transparent packaging. Requires two R6/AA/UM3 battery (sold separately).
|
) |
DR Fluorine Coated 8T Pinion Gear & HG Gear Shaft With the growing number of Dangun racers using tuned motors, there has been a growing demand for a gear and gear shaft that can appropriately handle this extra speed and power. This 8T pinion gear and gear shaft have been specially fluorine coated to reduce friction caused by a faster motor, allowing your racer to get the full benefits of a tuned motor. A must have for serious Dangun racers. |
Grade-Up Parts Series No.339(ITEM 15339)Compatible with Dangun Racer Evo chassis and Dangun Racer Type 1 and Type 2 chassis.
|
) |
DR Motor Cooling Shield Introducing a new cool design heat sink for Dangun motors. Not only protecting your motor from overheating, this lightweight aluminum heat sink gives your motor a reinforced, more aggressive appearance. |
Grade-Up Parts Series No.340(ITEM 15340)Compatible with Dangun Racer Evo chassis and Dangun Racer Type 1 and Type 2 chassis.
|
|
R/C Hop Up Option Parts Item 53701 ---------------------------------DF-02 Aluminum Damper Set Item 53702 ---------------------------------DF-02 Spring Set *Option parts for TRF415, TB Evolution IV, TG10-Mk.2, TG-M03 chassis will also be gradualy released. |
| |
|
R/C Spare Parts Item 51071 ---------------------------------1/10 Scale Porsche Carrera GT Wheels (Offset +2) Item 51024 ---------------------------------TGM-03 B Parts (Suspension Arm) Item 51025 ---------------------------------TGM-03 C Parts (Upright) Item 51026 ---------------------------------TGM-03 D Parts (Bulkhead) Item 51027 ---------------------------------TGM-03 J Parts (Diff Case) Item 51028 ---------------------------------TGM-03 L Parts (Under Guard) Item 51029 ---------------------------------148/80 Lightweight Block Tire & Wheel Item 51030 ---------------------------------TGM-03 Spur Gear Set Item 51031 ---------------------------------TGM-03 Hard Steel Pinion (17T) Item 51032 ---------------------------------TGM-03 Clutch Shoe Set Item 51033 ---------------------------------TGM-03 Brake Disc Item 51034 ---------------------------------TGM-03 Joint Cup Set Item 51035 ---------------------------------TGM-03 Propeller Shafts (F & R) Item 51074 ---------------------------------DF-02 Bathtub Frame Item 51075 ---------------------------------DF-02 A Parts (Gear Case) Item 51076 ---------------------------------DF-02 B Parts (Upright) Item 51077 ---------------------------------DF-02 C Parts (Suspension Arm) Item 51078 ---------------------------------DF-02 D Parts (Bumper) Item 51079 ---------------------------------DF-02 Q Parts (Servo Horn) Item 51080 ---------------------------------DF-02 Spur Gear (70T) Item 51081 ---------------------------------DF-02 Drive Shaft (2pcs.) Item 51082 ---------------------------------DF-02 U-shaped Shaft Item 51072 ---------------------------------1/10 Porsche Carrera GT Wheels (24mm Width / Offset 0) Item 51073 ---------------------------------TB-02 Urethane Bumper S *Spare parts for TB Evolution IV and TG10-Mk.2 chassis will be released at the same time as the kits. |
| Prev |
Page 11 of 12 | Next |
Back | Home