Glow-Engine R/C Cars for Beginners

Assembly Kits |

Factory Assembled |

Additional Items |

Engine Startup |

Maintenance

Engine Startup

Turn Switch On
Turn the transmitter switch on first followed by the receiver switch.

Add Fuel
Use the fuel filler to transfer fuel from the fuel can to the fuel tank.

Press Choke Button
Push the choke button until fuel reaches to the carburetor, and then press an extra two times.

Set Glow Plug Heater
Place the glow plug heater firmly in place locking onto the glow plug.

Start Engine
Pull the starter chord firmly to start the engine.

When engine does not start:
If you are having trouble starting the engine, adjust the throttle trim to about half-throttle. Once the engine starts, return the trim to original position.

Turning the engine off

TGS Chassis

TGX & TG10 Chassis

TGM-02 Chassis