1/10 R/C Limited EditionTyrrell P34 SIX WHEELER 1976 JAPAN GP
Item No：84111
)
Length: 430mm Image shows finished model. ※Click to enlarge
| 【 Just Like The Real Thing 】 Causing a sensation with its introduction to the 1976 F1 Grand Prix was the Tyrrell P34, the only 6-wheeled F1 race car ever to compete in the history of F1. This is a 1/10 R/C assembly kit model of the Tyrrell P34 which raced at the 1976 Japanese GP. All of the distinctive features of the P34 including the sports car adopted body cowl, exposed V8 engine, triangular air funnel net guard, and large-sized rear wing panels, are all accurately reproduced with a durable polycarbonate. The polycarbonate driver figure part is separately molded to allow easy painting. Included are stickers to depict team drivers Jody Scheckter's No.3 and Patrick Depailler's No.4 cars. This model features a realistic scale-like body and the same sharp driving response seen with F1 machines to allow you to relive the exciting driving performance of the P34. |
| 【 Did I Hear, Modify? 】 The high performance direct drive 2WD chassis comes equipped with a half double deck frame with 1.5mm thick upper and 2.5mm thick lower FRP plates. The kingpin coil spring 4-wheel independent front suspension consists of the one-piece lower arm and the left/right upper arms. One servo controls the steering of all four front wheels. The rear suspension features a rigid T-bar suspension with a coil spring and friction plate. The spur gear has a built-in ball diff that has a limited slip effect. In addition, both front and rear tires are made with semi-pneumatic rubber. Inner sponge for the rear tires are included. |
) Kingpin coil spring links up well the 4-wheel independent suspension. One servo controls all four front wheels. |
|
) Compatible with any kind of 7.2V Tamiya battery pack. |
|
) The large-sized rear wing panels seen at the Japanese GP is faithfully reproduced. |
) Front nose features a great scale realism. Wingtips are depicted with separate parts. |
|
) Separate polycarbonate parts to depict the driver, side mirrors, and body add realism. |
|
) The DFV engine's cam cover is realistically reproduced. The distinctive triangular net guard is produced with separate parts. |
| 【 Specifications 】 ●Length: 430mm ●Width: 204mm ●Height: 108mm ●Weight: 815g ●Tread: 134mm (Front), 155mm (Rear) ●Tire Width/Diameter: 42/23mm (Front), 67/50mm (Rear) ●FRP Half Double Deck Frame ●Horizontally mounted motor rear direct drive 2WD ●Ball differential gear ●Symmetrical steering tie-rods ●Suspension: Kingpin coil spring (Front), T-bar rigid (Rear) ●Gear Ratio=4.5:1（when used with 14T Pinion and 63T Spur gear）●Type 540 motor ●Requires Electronic Speed Controller (sold separately) |
| 【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●8xR6/AA/UM3 batteries for transmitter |
Specifications are subject to change without notice.
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of February 3, 2010.)