スペース
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models

1/10 Electric R/C Car
F103RM (w/T Body)
Item No:84031 ※Limited Edition RC Item


Length=330mm 
(Image shows assembled kit. Body and front and rear wings included. Battery and RC components sold separately.)

【 Direct Drive=Good Drive 】 With the motor pinion being directly set to the spur gear, this electric motor R/C assembly kit car is a lot of fun with its smooth handling and sharp response thanks to its rear direct drive system. On the FRP lower deck there is a half type upper deck chassis. Front independent left/right suspension utilizes the kingpin coil spring, while the friction plate and the coil spring are attached to a durable FRP T-bar controlling the rear suspension. The 540 motor is loaded in an adjustable gearbox, with the 7.2V battery placed at the rear for excellent balance. Also equipped is a standing steering servo mount and isometric left and right tie-rods which produce no reoccurring steering habits. With its simple construction and easy assembly, you can have hours of fun with its lightweight body and sharp running. Polycarbonate body and front and rear wings included.

【 Main Parts 】 ●FRP half double deck ●FRP T-bar ●Ball diff. ●Formula Lightweight diff. joint ●Formula adjustable gear case ●Formula rear suspension ball mount ●F/R sponge tires ●Full ball bearings ●Type 540 motor included


■Standing steering servo mount and isometric left and right tie-rods display no reoccurring steering habits.

■Friction damper and coilspring are attached to a durable FRP T-bar controlling the rear suspension.

■The aluminum diff. joint and wheel stopper allows for faster acceleration.

【 Specifications 】 ●Chassis length: 330mm(wingless) ●Chassis width: 200mm ●Tread F: 170mm R:160mm ●Motor: 540 type ●Drive train: Direct drive ●Differential gear: Ball diff. ●Steering Tie-rod: Divided in two parts ●Suspension: Front- Independent kingpin coil, Rear- T-bar rigid ●Gear ratio: 3.7:1 ●Tire width/diameter:Front 30/60mm Rear 40/64mm ●Speed Controller: electronic speed controller

【 Separately Required Items 】 ●RC Unit:Expec GT-1、or FET 2-channel R/C unit with electronic speed controller ●Battery/Recharger: Tamiya 7.2V Racing Pack or 7.2V Advance Pack ●8xR6/AA/UM3 batteries for Expec GT-1 or FET 2-channel R/C unit

スペース

Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(This information was updated July 10, 2008)