★ Click here to see the list of compatible Body Parts Set. ★
1/10 Electric R/C Car Series No.463
FF-03 PRO Chassis Kit
Item No：58463
)
Length=384mm （Image shows assembled model.）
Body, R/C unit, battery pack, motor, and tires sold separately. ※Enlarged image
| 【 The Next Generation FWD Chassis 】 Experience the crisp handling performance of this new FF chassis when cornering with the accelerator off. The longitudinal battery layout allows for a slim chassis design, with the R/C units loaded on either side for optimum balance. In addition, the front-mounted, compact gearbox provides the chassis with an ample amount of traction. An Inboard Front Suspension set-up with short reversible suspension arms and fiberglass nylon uprights from the TRF416 enable well balanced settings. Furthermore, TRF dampers, aluminum turnbuckle shafts, aluminum ball connectors, aluminum motor plate, etc. are all included to give this machine a PRO-spec finish. Take control of the FF-03 and enjoy a new driving experience. |
| 【 Main Specifications 】 ●TRF Special Dampers (Hard Black Coating) ●Aluminum Turnbuckle Shafts ●Aluminum Motor Plate (Blue) ●Hi-Torque Servo Saver (Black) ●Aluminum Horn For Hi-Torque Servo Saver ●Aluminum Ball Connectors ●Low-Friction Adjusters ●Ball Differentials ●Short Reversible Suspension Arms ●Fiberglass-Reinforced Nylon Resin TRF416 Uprights ●Full Ball Bearings |
) ■Front Section Front section features the Inboard Front Suspension setup. The rocker bridge is equipped with stabilizer holders. |
|
) ■Ball Differential Comes standard with an aluminum motor plate. The compact gearbox features a ball differential. |
|
) ■Longitudinally-Placed Battery Longitudinal battery layout enabled the slim chassis design. R/C units are positioned on either side for optimum balance. |
) |
|
) |
|
■Adjustable Wheelbase 3 wheelbases (257, 245, 233mm) can be assembled by replacing rear block parts. ■Rear Section Option Parts suspension mounts can be used to enable fine suspension adjustment. |
| 【 Specifications 】 ●Length: 384mm, Width: 185mm ●3 Wheelbases are possible (257, 245, 233mm). ●Tread (Front & Rear): 157mm ●Bathtub Type Chassis Frame ●Front Motor Front Wheel Drive ●Ball Differential ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●TRF Dampers ●Gear Ratio＝6.80:1 ●Full Ball Bearings ●Requires separately sold motor and ESC (Electronic Speed Controller). |
|
【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter (x8) |
| 【 Compatible Body Parts Sets 】 |
|
51403 Lamborghini Gallardo LP560-4 Super Trofeo 51376 Mitsubishi Lancer Evolution X 51375 Cusco Dunlop Subaru Impreza 51374 Mercedes AMG DTM - C Class 2008 - Original Teile 51373 Lexus GS 400 51372 ORC Amemiya SGC-7 51364 Subaru Impreza WRC 2008 51345 Lamborghini countach LP500S 51340 Nissan GT-R 51339 Volkswagen GOLF GTI Cup Car |
|
51337 Suzuki SX4 WRC 51336 Porsche 911 GT3 CUP VIP 2007 51291 Toyota Supra 51289 Subaru Impreza WRC Monte-Carlo '07 51270 Mazda RX-7 51258 NISMO Coppermix Silvia 51257 Mobil 1 SC 51246 NISMO R34 GT-R Z-tune 51245 ARTA NSX 51184 Calsonic IMPUL Z |
|
※Click to see the full list of compatible Body Parts Set (PDF file) (As of June 9, 2010) |
Specifications are subject to change without notice.
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of June 17, 2010.)