1/10 R/C Car Series No.428
NISSAN SKYLINE GT-R (R32) (TT-01D CHASSIS) DRIFT SPEC
Item No:58428 )
Length: 452mm (Image shows painted and assembled model) ※Click to enlarge
| 【 Enjoy Drifting the Popular GT-R (R32) 】 Announced in May 1989, the electronically controlled 4WD Nissan Skyline GT-R (R32) came released with a inline 6-cylinder engine which pumped out a cool 280hp. After the release of the R32, Nissan later released R33 & R34 models, but the popularity of the R32 never waned. This is a 1/10 assembly kit R/C car of the very popular Nissan Skyline GT-R (R32). The polycarbonate shell realistically captures the GT-R's form as seen with the prolific wide front & rear fenders and bumper air-intakes. Moreover, high brightness always-on LED lights depicting headlights (white) and taillights (red) are included to provide a realistic experience. Combined with the TT-01D Drift Spec chassis, this machine offers you thrilling drift action. |
|
【 Specially Tuned Drift Chassis 】 The TT-01D Drift Spec chassis is evolved from the bathtub frame type shaft driven TT-01 chassis which mounts the R/C unit and battery close to the ground for optimum balance and low center of gravity. It is equipped with durable resin 24mm wide Super Driftech Tires that ensure superior drift control and long-lasting performance. In addition, the CVA oil dampers with short springs are mounted onto the 4-wheel double wishbone suspension. Full ball bearings are included for enhanced efficiency, and an aluminum motor heat sink helps cool the Sport-Tuned Motor during intense drift runs. ＜Super Driftech Tires＞ Included in the set are resin made high endurance Super Driftech Tires (Width: 24mm) which offer your machine excellent control. Performance rarely changes from heat build up or abrasions caused when driving. |
| 【 Specifications 】 ●Length: 452mm, Width: 187mm, Height: 133mm. ●Wheelbase: 257mm ●Tire Width/Diameter (Front & Rear): 24/63mm ●Bathtub Type Frame ●Longitudinally Placed Motor Shaft-Driven Full Time 4WD ●Front and Rear 3-Bevel Differential Gears ●3-Piece Steering Tie-Rods ●4-Wheel Double Wishbone Suspension ●Front & Rear CVA Oil Dampers & Super Mini Short Springs ●Gear Ratio= 8.35:1 ●RS-540 Sport-Tuned Motor ●Electronic Speed Controller (Sold Separately) |
|
【 Separately Required Items 】 ●R/C Systems: Expec GT-I, or a 2-channel transmitter with ESC. ●For more information on batteries click here. ●Requires eight R6/AA/UM3 batteries for transmitter.
|
Specifications are subject to change without notice.
| ||||||
Home | Scale Models | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of March 25, 2009.)