LAMBORGHINI countach LP500S (TT-01 Type-E Chassis)

1/10 R/C Car Series No.413

LAMBORGHINI countach LP500S (TT-01 TYPE-E CHASSIS)
Item No：58413　

Length: 445mm （Image shows painted and assemble model）　

【 It Comes Back! 】　At the International Geneva Motor Show in 1971, the Lamborghini had announced its prototype countach for the first time and impressed automobile fans around the world. In addition to the futuristic wedge shape design, the car features V12 engine mounted longitudinally with a mid-engined configuration and the power train which the transmission, clutch, and engine are positioned backwards. The first production model, the LP400 debut in 1974, and the LP400S followed later. The 3rd generation LP500S was announced at the Geneva Motor Show in 1982 and features same front spoiler and front/rear over fenders as well as the optional rear wing. The engine was boosted up from 3929cc to 4754cc, and the cabin and exterior details were re-fined. 320 of LP500S were produced until 1985, and it now comes back at your finger tips as a 1/10 scale R/C model.

【 TT-01 Type-E with Rear Wide Tread 】　The bathtub frame of the newly evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame are fiberglass reinforced nylon upper deck and gear covers that improve rigidity, as well as a 3 piece tie rod that provides a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. In addition, it is equipped with rear long wheel axles to widen the tread.

■Uprights
The strengthened TT-01 Type-E front/rear uprights provide sharper steering response and improve stability.

■Steering
3 piece steering linkage system provide precise steering control.

■Damper Stay
The damper stay and gearbox cover are exclusive to this car. There is a choice of 2 installation points for the damper stay.

■Upper Deck
Fiberglass reinforced nylon upper deck improves chassis rigidity.

■Transponder Stay
It is possible to install a transponder stay for racing specifications.

■Rear View
Always-on high brightness LED lights depict fog lamps (white) and taillights (red).

【 Specifications 】　●Length: 445mm, Width: 203mm, Height: 122mm　●Wheelbase: 251mm　●Front and Rear Tire Width/Dia.: 27/67mm　●Bathtub Chassis　●Drive Train: Longitudinally Placed Motor Shaft Driven 4WD　●Front and Rear 3-Bevel Differential Gears　●3-Piece Tie-Rod Steering　●4 Wheels Double Wishbone Suspension　●Front and Rear Friction Dampers　●Gear Ratio: 8.35:1　●540 Type Motor　●Requires an Electronic Speed Controller

【 Separately Required Items 】　●EXPEC SP R/C system w/ESC ●Battery pack and charger ●8xR6/AA/UM3 batteries for transmitter

【 Dress Up Your Machine with Brilliant LEDs 】　Connect these LEDs to the TLU-01 LED Light Unit to enhance the look of your car. Realistic blue tint is similar to the lights of the actual car. Includes a convenient clip for bundling the cable. LEDs come in 3mm and 5mm diameter sizes and in colors white, red, yellow, orange, blue and purple.

【 Performance & Maintenance 】　

■ITEM 54025 （OP.1025）
　TT-01 TYPE-E Ball Bearing Set

■ITEM 54026 （OP.1026）
　TT-01 Aluminum Propeller Joint & Set

■ITEM 53800 （OP.800）
　Aluminum Toe-In Rear Uprights
(TT-01,TGS）

【 Please Note 】The below 6 parts cannot be used with the countach.
ITEM 51002 （SP.1002） TT-01 A Parts（Uprights）
ITEM 53497 （OP. 497） TT-01 Ball Bearing Set
ITEM 53670 （OP. 670） TT-01 Aluminum Racing Steering Set
ITEM 53672 （OP. 672） TT-01 Carbon Upper Frame
ITEM 53694 （OP. 694） TT-01 Stabilizer Set (Front)
ITEM 53695 （OP. 695） TT-01 Stabilizer Set (Rear)