1/10 Expert Built Series No.91
XB Mercedes AMG DTM -C Class 2008- Original Teile (TT-01 Type-E)
Item No:57791
)
Length: 460mm ※Click to enlarge
| 【 Dynamic Form, Distinctive Livery 】 The DTM (Deutsche Tourenwagen Masters) is a greatly popular car race series throughout Europe and is famous for its exciting battles. In the 2008 season, Mercedes and Audi entered 19 cars and continually swept aside the competition. One of these cars, the Mercedes AMG - C Class 2008 - Original Teile, which was driven by five times DTM champion B. Schneider, is now depicted with this 1/10 scale R/C Expert Built model. The aerodynamic form of the race car has been realistically reproduced with lightweight, durable polycarbonate. The distinctive livery of the race car has been accurately reproduced with included markings. In addition, LEDs are installed to depict realistic head and tail lights. |
| 【 R/C Units, Battery Pack, and Charger 】 R/C units are installed onto the pre-assembled chassis, and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. All you need to do is install the charged battery pack and then you are ready to go! (Battery pack and charger are included for Japan only.) | |
) |
| 【 Enhanced Performance 】 The bathtub frame of the newly evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame are fiberglass reinforced nylon upper deck and gear covers that improve rigidity, as well as a 3 piece tie rod that provides a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. The chassis comes equipped with an electronic speed controller (ESC) for smooth throttle control. |
| 【 Specifications 】 ●Length: 460mm, Width: 185mm, Height: 128mm ●Wheelbase: 257mm ●Tire Width/Diameter (Front and Rear): 27/67mm ●Bathtub Type Frame Chassis ●Longitudinally Placed Motor Shaft-Driven Full-Time 4WD ●Front and Rear 3-Bevel Differential Gears ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front and Rear Friction Dampers ●Gear Ratio＝8.35:1 ●540 Type Motor Included. ●Forward/Reverse ESC (Electronic Speed Controller) Included. ※Requires 8xR6/AA/UM3 Batteries for Transmitter. |
Specifications are subject to change without notice.
|
Home | Scale Models | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of July 13, 2009.)