4-Channel Operation
Controlling the tank- Illustrations depict controller set to forward movement (left stick is pushed to full throttle)
Firing the main gun Firing the main cannon

Firing the cannon creates flashes of light and causes the tank to vibrate. In pursuit of realism, firing interval has been set to 5 seconds (12 blasts a minute for mid-sized tank mode). (Tank does not fire ammunition).
Method of operation
Push the trim lever located on the left side of the right stick to the full-forward position. Rapidly push the right stick from mid-position to full-forward position.
Turret rotation Gun-turret rotation

Realistic sound emitted when turret rotates. Enjoy the thrill of locking your sites on target! Gun-turret speed can be adjusted (Max. speed- 1 rotation per 18sec.).
Method of operation
Move stick left/right to engage left/right turret movement.
Cannon Elevation Cannon Elevation

Realistic sound emitted when cannon raises/lowers. (Elevates to positive 15 degrees. Lowers to negative 5 degrees).
Method of operation
Move right stick up/down to elevate/lower cannon.
Firing forward mounted machine gun Firing forward mounted machine gun

The forward mounted M1919A4 machine gun emits noise and flashes of light via diode. Machine gun can be fired in 3-second bursts.
Method of operation
Push the trim lever located on the left side of the right stick to the full-down position. Rapidly move the right stick from mid-position to full-down position.
Engaging Lights Engaging lights (front and rear)

Now you can enact night missions with even more realism.
Method of operation
Push the trim lever located under the left stick all the way to the right side. Move the left stick rapidly to the upper right. Use the same method to disengage lights.

Inquiries can be made at your regional Tamiya agent-
Click here for World Wide Agent List


4-Channel Upgrade- Top Page | Wiring of the 4-channel receiver