1/10 Electric R/C Car
Item No：49498 ※Limited Edition R/C Item
Length=330mm
(Image shows assembled kit. Body, front and rear wing included. Battery and R/C equipment sold separately)
| 【 The Charm of the Direct Drive Chassis 】 With the motor pinion being directly set to the spur gear, this electric motor R/C assembly kit car is a lot of fun with its smooth handling and sharp response thanks to the rear direct drive system. On the FRP lower deck there is a half type upper deck chassis. Front independent left/right suspension utilizes the kingpin coil spring, while the friction plate and coil spring are attached to a durable FRP T-bar controlling the rear suspension. The 540 motor is loaded in an adjustable gearbox, with the 7.2V battery placed at the rear for excellent balance. Also equipped is a standing steering servo mount and isometric left and right tie-rods which produce no reoccurring steering characteristics. With its simple construction and easy assembly, you can have hours of fun with its lightweight body and sharp running. Polycarbonate body and front and rear wings included. |
| 【 Main Parts 】 ●FRP half double deck ●FRP T-bar ●Formula Ball diff. ●Formula Lightweight diff. joint ●Formula adjustable gear case ●Formula rear suspension ball mount ●F/R sponge tires ●Full ball bearings ●Type 540 motor included |
) ■The front left/right independent suspension utilises upright kingpin fitted to a coil spring. High gripping sponge-like lightweight tire. |
 |
) ■Friction plate and coil spring are attached to a durable FRP T-bar. A smoother roll is created with the mounting of the T-bar on the ball mount. |
|
) ■The gear case is height adjustable. Also equipped is a lightweight differential joint which allows for fast acceleration. |
| 【 Basic Specs 】 ●Chassis length: 330mm（wingless） ●Chassis width: 200mm ●Tread F: 170mm R：160mm ●Motor: 540 type ●Drive train: Direct drive ●Differential gear: Ball diff. ●Steering Tie-rod: Divided in two parts ●Suspension: Front- Independent kingpin coil, Rear- T-bar rigid ●Gear ratio: 3.7:1 ●Tire width/diameter：Front 30/60mm Rear 40/64mm ●Speed Controller: electronic speed controller |
|
【 Separately Required Items 】 ●RC Unit：Expec GT-1, or FET 2-channel R/C unit with electronic speed controller ●Battery・Recharger: Tamiya 7.2V Racing Pack or 7.2V Advance Pack |
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(This information was updated May 23, 2008)