Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models

1/8 Scale Factory Assembled R/C Glow Engine Cars No.1 (ITEM 43501)

Terra Crusher
Total length- 560mm, total width- 440mm, total height- 285mm, weight fully equipped- 5.7Kg

Click for enlarged picture with explanation
Rear view Chassis Engine Muffler
Brake Fuel tank Servo Mechanism box

About the Terra Crusher
From the depths of the earth comes the Terra Crusher! Made in the spirit of the American monster truck, Tamiya presents a pre-painted, pre-assembled off-road R/C machine, packed with a powerful engine and ultra-durable parts that let it tackle the most rugged of terrain- No roads, no problem.

Ready to Crush
Full set Ready to Crush
The Terra Crusher comes completely pre-assembled from the inside out and comes with fuel pump and pre-adjusted .18ci (approx. 3cc) engine, all you need is a 7.2V battery pack to start the engine and fuel to run and then your set to crush, Terra crush that is.
FRAT 2-Speed Automatic Transmission
Many features of the Terra Crusher give this machine superiority over its rivals. One feature that needs particular highlighting is the Terra Crusher's 2-speed FRAT(forward and reverse automatic transmission). FRAT enables the Terra Crusher to adjust to a variety of terrain by switching to low and high gears when needed to effectively maximize control. FRAT also realizes smooth, controlled reverse driving!
Electric starter Engine Start Method
Glow engine can be easily started by connecting electric starter (included) to model and pushing button.
Large Large and In-charge!
Total length: 560mm, total width: 440mm, total height: 285mm, wheel base: 360mm, weight fully equipped: approx. 5.7kg
Don't just take our word for it!
Terra Crusher Video Check out a video of this powerful R/C Monster Truck in action!


240x180 pixel Approx. 15 sec (1.6MB)
*Takes approximately 6min. to download with a 56K modem

Basic Specifications
Total length: 560mm Total width: 440mm Total height: 285mm Wheelbase: 360mm Weight fully equipped: 5.7kg Tread (f/r): both 326mm Chassis material: 2.5mm thickness duralumin and reinforced resin ladder frame. Steering tie rod: 3 parts. Suspension (f/r): double wishbone Caster angle (f/r): 8deg./0deg. Camber angle (f/r): both 0.5deg. Toe angle (f/r): 1 deg./variable Damper: f/r both CVA oil dampers Transmission: shaft drive full-time 4WD Full ball bearings Gear ratio: 1st gear 29.67:1, 2nd gear 20.4:1 Diff. Gear System: f/r 3-bevel diff. Engine: FS-18 Exhaust: 2.95cc Muffler: TM-7 Brake: double disc Fuel tank: 150cc (choke pump attached) Tire width: f/r 100mm Tire diameter: f/r 176mm Tread pattern: f/r rug pattern

Required Items (Sold Separately)
Engine R/C car fuel such as TG Fuel 2000 or 3000 7.2V Ni-Cd battery pack for electric starting unit as well as battery charger Twelve R6/AA/UM3 batteries for R/C system

Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models