スペース
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models

1/12 Big Scale Series No.32

1/12 Honda RA273 (w/Photo-Etched Parts)

Item No:12032 


Length: 333mm  (Image shows assembled and painted model kit)

【 Honda's 3 Liter F1 Machine 】  In 1966, Formula 1 regulations were changed and indicated a move from cars with 1.5 liter engines to those with 3 liter ones. Having finally tasted success with the 1.5 liter RA272 the year before, the green Honda engineers unfortunately had to start from scratch again, and the RA273 was not ready until the Italian GP in the 1966. Featuring a lightweight monocoque frame with aluminum panels and powered by a 90 degree V-12 engine, the car was driven by Richie Ginther and John Surtees, with Ginther finishing the season in a respectable 4th place overall.


■The front cowl can be detached by removing two small screws to view the detailed radiator and water tank underneath it.
スペース
■The exquisite V-12 engine has been realistically reproduced complete with aluminum exhaust pipes, fuel lines, and ignition cables.
スペース
■Cockpit features photo-etched parts for the steering wheel spokes and metal transfers for the instrument panel.
スペース

■The gearbox is located at the rear of the engine and photo-etched parts replicate the details of the oil cooler core.

【 About the Model 】  ★Length: 333mm, Width: 143mm, Height: 70mm ★Meticulously detailed V-12 engine features fuel pipes and ignition cables. The 12 exhaust funnels are made from shaved aluminum. ★Fully-movable front and rear suspensions are equipped with metal coil springs for life-like operation. ★Moving the steering wheel actually turns the front wheels. ★Nose cowling can be attached and removed even after assembly to display radiator and water tank. ★Extensive set of photo-etched parts, including brake discs, oil cooler, and steering wheel spokes are included for the ultimate finish. ★Manufacturer emblems, mirror surfaces, and instrument panel depicted with metal transfers. ★Hollow rubber tires with accurate tread patterns add to the model's racing feel. ★1 driver figure included. ★3 types of markings included to depict cars driven by Richie Ginther and John Surtees.

The information on this page is current as of June 15, 2015. Specifications are subject to change without notice.
スペース
スペース

Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models