NEW ITEMS: Kids

[Index] [R/C Models] [Scale Models] [Tools & Paints]

		Item No: 71125
		Mechanical Fish (Tail Fin Swimming Action)
		Robo Craft Series No.25 The Mechanical Fish uses the Submarine Motor Mini and Underwater Gearbox to move its tail via a crank shaft which moves its tail from side to side to produce its swimming action. The fish swims underwater with only the dorsal fin sticking out of the water. Easy-to-assemble design. The upper float has a plastic case with a styrofoam plate, allowing the fish to swim.

[Click to enlarge]

		Item No: 75025
		Wind-Up Power Generator Set
		Elecraft Series No.25 This new set will let you experience first hand what green energy is all about. By winding the handle, you create the electricity which is stored in the capacitor to drive the car. Winding the handle for more than 30 seconds, the rechargeable car runs more than a minute. The car and the generator unit are connected by connecters which enable easy attachment and detachment. Motorized car length: 122mm.

[Click to enlarge]

		Item No: 18631
		Spin-Axe Mk.II
		1/32 Mini 4WD PRO Series No.31 Featured in the popular Japanese Anime ”Bakuso Kyodai Let's & Go”, the Spin-Axe is Tokichi Mikuni's favorite machine. The wider body and its aero dynamic form give the impression that it glides like a flying squirrel. Small diameter tires are mounted on yellow fluorescent wheels. Comes equipped with a MS chassis with N-02 nose unit. Length: 152mm

[Click to enlarge]

		Item No: 94689
		Maxbreaker CX09 Black Special
		1/32 Mini 4WD Limited Edition The very popular Aero Mini 4WD Max Breaker TRF now comes as a special version. Setting the mechanical mood is its smoke colored ABS resin body. Comes with carbon fiber reinforced nylon resin chassis and wheels. Large diameter white slick tires. Length: 156mm

[Click to enlarge]

		Item No: 94696
		HG Carbon Reinforced FRP Wide Front Plate (for N-03 Unit)
		Mini4WD Limited Edition Parts This 3mm thick carbon plate allows wider roller positions when attaching it to the N-03 Bumperless Unit. The chassis can be adjusted to possible widest width for the race regulations when using 9, 13, or 19mm rollers.

[Click to enlarge]

		Item No: 94697
		HG Carbon Reinforced FRP Wide Rear Plate
		Grade-Up Parts Series No.400 This 3mm thick durable carbon rear plate allows wider roller positions. The chassis can be adjusted to possible widest width for the race regulations when using 9, 13, or 19mm rollers for a greater stability.

[Click to enlarge]

Grade-Up Parts

Multi-Brake Set (For MS Chassis)
Item No.15399

Limited Edition Parts

Rear Double Aluminum Plate
(For MS Chassis T-03 Unit)
Item No.94693

Small Dia. Offset Tread Tires (Soft/Clear)
Item No.94694

Small Dia. Offset Tread Tires (Hard/White)
Item No.94695

Limited Edition Parts

HG Angle Adjuster Chip Set
Item No.94698

HG Threaded Bearing Bushing Set
Item No.94699

For availability in your country, please check with your regional agent.
Click here for Agent List

[Index] [R/C Models] [Scale Models] [Tools & Paints]