NEW ITEMS
For availability in your country, please check with your regional agent.
Click here for Agent List

5 of 7 pages


PREV | HOME | NEXT



Twin Detonator
Overall length=431mm

1/10 R/C Car Series No.309
Tamiya is proud to present our latest radio-controlled monster truck: the Twin Detonator. The chassis adopts a sturdy gear-train mechanism, and firmly holds the gearboxes on both sides with a semi-monocoque frame. Polycarbonate body equipped with a metal-plated roll bar. Features 4 independent double wishbone suspensions with large diameter monster truck tires. Mechanical 3-speed controller and two Type 540 motors included.
Item 58309

XB Raybrig NSX 2003
Overall length=420mm

1/10 XB R/C Car Series No.25
Presenting the XB Series model of the Japan GT Championship (JGTC) Raybrig NSX 2003. Based on the high performance shaft-driven TT-01 chassis, which features a 4-wheel independent double wishbone suspension for precise control. A digital proportional transmitter is included. All you need is separately sold 7.2V NiCd battery with a compatible charger and R6/AA/UM3 batteries.
Item 57725

*Picture shows prototype.
2-Channel Remote Control Boxing Fighter.
Overall length=87mm

Robocraft Series No.10
The latest release in the Robocraft Series: the easy to assemble R/C boxer. Features a twin motor gear box enabling this little boxer to punch while moving. The type of punch can be changed from an upper cut to a straight jab. Hitting the face of an opposing fighter enough times will cause them to fall over. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down.
Item 71110
*Requires two R6/AA/UM3 batteries (sold separately).

Mechanical Turtle (Crawling Type) Finished Model
Overall length=166mm

Robocraft Series (Limited Edition)
Following the release of the Finished Model version of the Mechanical Tiger and Rabbit, Tamiya releases the Mechanical Turtle. Motor rotating power is transferred to the legs via crank plates. Each pair of legs (front and rear) is made as one piece Front leg plate is attached with a ball joint that serves as a fulcrum to realistically imitate a real turtle crawling. Requires one R03/AAA/UM4 battery (sold separately).
Item 89902

New Items Index

PREV | HOME | NEXT