(PAGE 7/12)
PREV | INDEX | NEXT
) |
LIQUID SURFACE PRIMER (40ml) In order to smooth over small scratches, many modelers have created their own liquified putty by dissolving putty with lacquer thinner. Tamiya now makes this process a whole lot easier by releasing our very own liquified putty, Liquid Surface Primer. Just brush on over scratches and rough areas and you will get that perfect smooth finish. |
 Applies easily to small areas using a modeling brush
Can be used on plastic, metal and wooden models
Can be further diluted using Tamiya Lacquer Thinner, allowing it
to be used in airbrushes etc.
1 bottle contains 40ml
(Item 87075) |
) |
TAMIYA LIGHT-CURING PUTTY Tamiya Light Curing Putty is a specially developed putty that cures quickly when exposed to sunlight or fluorescent light. In direct sunlight it will cure in approximately 1 minute, and 3 minutes under a fluorescent light. Consisting of a smooth paste property, the putty is easy to apply to any surface. |
Smooth paste form for easy application
Once hardened, easily shaped and smoothed using finishing
abrasive or a modeling file.
Can be used on plastic, metal and wooden models
1 tube contains 34g
(Item 87076) |
) |
TAMIYA LACQUER THINNER (250ml) A diluted lacquer thinner that is "plastic friendly", causing minimal damage to plastic models. |
Use to:
Remove paint from paint brushes
Dilute Liquid Surface Primer
Thin out putty
Dilute lacquer based paints
Clean paint, oil etc. from various surfaces, including putty and
actual model
1 bottle contains 250ml
(Item 87077) |
) |
1/12 FACTORY YAMAHA YZR-M1 '04 No.46/ No.17) Tamiya releases the 2004 Yamaha YZR-M1 to our 1/12 scale motorcycle series. With 3-time world champion Valentino Rossi joining the Yamaha team this season, the YZR-M1 has been the closest watched bike in this year's MotoGP. |
Compact in-line 4-cylinder engine and surrounding power train accurately reproduced.
Side and seat cowling can be removed after assembly allowing display of engine.
Synthetic rubber racing slick tires.
Newly developed poly caps used for easy damper assembly and cowling attachment.
Cartograf decals for Rossi's No.46 and Abe's No.11
(Item 14098) |
) |
1/12 KAWASAKI KR1000F ENDURANCE RACER Competing in the 1981 Endurance World Championship the Kawasaki KR1000F was designed for power and easy engine maintenance. Colored in Kawasaki's distinctive limegreen, the KR1000F broke Honda's long domination of the international endurance racing scene taking out the 1981 makers title and riders championship. |
Limited edition re-release of the Kawasaki KR1000F Endurance Racer.
Features all high-quality detailing of the original kit including 4-cylinder DOHC engine and unique suspension system.
Comes with all new Cartograf decals, with markings for both bikes that competed in the 1981 Endurance World Championship.
(Item 14012) |
PREV | INDEX | NEXT