(PAGE 5/12)
PREV | INDEX | NEXT
) |
1/10 XBG Xanavi NISMO Z (TGS-R) Following the Porsche Carrera, the Citroën Xsara and the Subaru Impreza, Tamiya now releases the JGTC Xanavi Nismo Z to our hot TGS-R XBG line-up. Featuring a fully assembled glow-engine chassis with body pre-painted and markings pre-applied, the XBG series gives you the best in engine ready-to-run excitement. |
 Powerful FS-12SW engine that is easy to use and maintain.
Features recoil starter and Speed-Tuned Gear.
Full bearings and oil dampers for unbeatable running performance and handling.
Includes transmitter and receiver.
0.8mm polycarbonate body represents Team Nismo's no.1 Xanavi Nismo(Item 43519) |
) |
1/10 TG10-Mk.2 Xanavi NISMO Z Tamiya introduces an engine touring car based on a simplified version of the high performance TG10-Mk.2 chassis. Kit includes engine, muffler and body and is aimed at the experienced engine car user wanting to make that step up to serious engine car racing. Compatible with a full range of option parts, kit can be easily up-graded. |
Powerful recoil start compact FS-12LS .12-size engine with muffler.
Engine and fuel tank forms one line for consistent fuel supply.
All heavy parts centered and lowered for excellent weight distribution and a low center of gravity.
200mm tread, the preferred tread for engine touring car racing.
One-speed transmission with centrifugal clutch and resin oil dampers.
4-wheel independent wishbone suspension with ball joint suspension arms (Item 44043) |
) |
1/10 TG10-Mk.2 RAYBRIG NSX 2004 Coinciding with the release of the TG10-Mk.2 Xanavi Nismo, Tamiya also introduces the Raybrig NSX on the TG10-Mk.2 chassis. Kit includes engine, muffler and body and is aimed at the experienced engine car user wanting to make that step up to serious engine car racing. Compatible with a full range of option parts, kit can be easily up-graded. |
Powerful recoil start compact FS-12LS .12-size engine with muffler.
Engine and fuel tank forms one line for consistent fuel supply.
All heavy parts centered and lowered for excellent weight distribution and a low center of gravity.
200mm tread, the preferred tread for engine touring car racing.
One-speed transmission with centrifugal clutch and resin oil dampers.
4-wheel independent wishbone suspension with ball joint suspension arms (Item 44045) |
 |
NDF-01 2-SPEED TRANSMISSION A 2-speed transmission for the standard 1-speed NDF- 01 chassis (Nitro Thunder). Adding a 2-speed transmission to your chassis allows you to get maximum performance from your engine. |
Allowing
adjustment to when your car changes gears, you can obtain
gear settings for the best performance on both slow and
fast circuits.
Includes a reinforced clutch bell and option of
3 gear ratio settings.
(Item 53780) |
PREV | INDEX | NEXT